|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Kenmore no spin cycle | Rate Topic |
| Author | Post |
|---|
| Posted: Sun Apr 3rd, 2005 12:33 am |
|
1st Post |
|
rcarlso5 Grasshopper
|
Washer has all functions except spin cycle. Lid switch is ok. Jumped electrical connector for lid switch circut still no spin and had 120 volts. Direct drive no belt. Checked couppler on motor to transmission ok.
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Apr 3rd, 2005 12:35 am |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Do you hear any noise during the spin cycle or does the machine go eerily silent?
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sun Apr 3rd, 2005 12:44 am |
|
3rd Post |
|
rcarlso5 Grasshopper
|
The motor continues to run and it is pumping all the water out.
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Apr 3rd, 2005 03:01 am |
|
4th Post |
Jedi Appliance Guy
|
Next time it does this, open the lid while it is running and pumping but not spinning. Then close the lid. If it starts spinning I'd say you need a timer.
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Apr 3rd, 2005 03:09 am |
|
5th Post |
|
denrayr Fellow, Academy of Sublime Masters of Appliantology 
|
Jedi Appliance Guy wrote: Next time it does this, open the lid while it is running and pumping but not spinning. Then close the lid. If it starts spinning I'd say you need a timer. if opening and closing the lid starts tub spinning it could also be a bad nuetral drain transmission. rcarlso5: are you sure the coupler is good? sometimes the will split where they are pressed on and when trying to spin will slip.
____________________ RedRock Appliance Service 435-773-7838 http://www.redrockrepair.com Serving St George and Southern Utah |
||||||||||||||
| |||||||||||||||
Current time is 11:34 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore no spin cycle | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
