|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Whirlpool Washer wont spin |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! | Page:   1 2 |
|
||||||||||||
| Whirlpool Washer wont spin | Rate Topic |
| Author | Post |
|---|
| You have chosen to ignore jon2249. click Here to view this post |
|---|
| Posted: Sun Oct 16th, 2005 06:21 am |
|
22nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
You need to remove the cabinet from the washer and run it that way in an attempt to locate the source of the smell and/or smoke.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sun Oct 16th, 2005 11:49 am |
|
23rd Post |
|
Budget Appliance Repair Fellow, Academy of Sublime Masters of Appliantology
|
jon2249 wrote:Pictures of my motor and pump are located here. Jon, from your very first picture it is real obvious what is burning..... You have destroyed that new pump you installed, (or if the old pump when you tried to take it off you didn't get it back into place when you put things back together). You didn't get the four pump foot pegs mounted into the four little round indentions in the motor or if you did you didn't install the pump clips to keep the pump in place and the pump spun around and the mounting post/legs of the pump have been chewed off from entering into the running motor, thus your burning/melted plastic smell. Actually on second look at more of your pictures that does appear to be your old orignal pump that was leaking that you couldn't get off and the damage may have been done when you tried to remove the pump. Regardless, now you for sure need to replace that pump.
____________________ William Burk (Willie) Willie's Budget Appliance Repair Eureka, CA 95501 |
||||||||||||||
| |||||||||||||||
| You have chosen to ignore jon2249. click Here to view this post |
|---|
| Posted: Mon Oct 17th, 2005 02:25 am |
|
25th Post |
|
Pegi Fellow, Academy of Sublime Masters of Appliantology 
|
Use it if you want to take a chance of flooding your house with 28 gallons of water, if the plastic melts thru on the end. of the pump.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy at RepairClinic! 
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Oct 17th, 2005 09:27 am |
|
26th Post |
|
Budget Appliance Repair Fellow, Academy of Sublime Masters of Appliantology
|
Pegi wrote:Use it if you want to take a chance of flooding your house with 28 gallons of water, if the plastic melts thru on the end. of the pump. Good advice for our "Lurker", Pegi...... It actually looks like the bottom corner of the front of his pump is already almost cracked all the way through already. I'm really surprised it isn't already pouring water out.
____________________ William Burk (Willie) Willie's Budget Appliance Repair Eureka, CA 95501 |
|||||||||||||
| ||||||||||||||
| You have chosen to ignore jon2249. click Here to view this post |
|---|
| Posted: Tue Oct 18th, 2005 11:24 am |
|
28th Post |
|
Budget Appliance Repair Fellow, Academy of Sublime Masters of Appliantology
|
Most likely the legs of the pump were jammed down in the fan on the motor, (motor jammed, won't start, starts to smell as it burns up).
____________________ William Burk (Willie) Willie's Budget Appliance Repair Eureka, CA 95501 |
|||||||||||||
| ||||||||||||||
| You have chosen to ignore thankful. click Here to view this post |
|---|
Current time is 02:51 am
|
Page: 1 2 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Whirlpool Washer wont spin | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
