|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > model number 110.67062600 dryer |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| model number 110.67062600 dryer | Rate Topic |
| Author | Post |
|---|
| Posted: Fri Nov 5th, 2010 01:01 am |
|
1st Post |
|
certified tech group 51 Fellow, Academy of Sublime Masters of Appliantology 
|
Customer called said the dryer will not start, code F-02. tech sheet indicated faulty keypad............nope, keypad tested O.K...............After checking motor circuit, there was no power out of the relay on the control board........... Installed new board, unit will start , run about 5 seconds then stop, then code F-40......... That is strange, the tech sheet only has failure codes up to F-30.......... ( Flashback to first visit, I checked the plug before plugging it into the receptical, found that L-1 and L-2 had burnt marks on them. I asked the customer what happened......He said that there was a metal cover plate and he did not pull the plug out straight ) .......... Back to the future, SO when I hold the start button down it stays running, release the button it stops........... SO what is F-40......... got a few ideas but ran out of time this afternoon......
|
||||||||||||||
| |||||||||||||||
| Posted: Fri Nov 5th, 2010 05:47 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
110.67062600 Tech Sheets (ServiceMatters was down till now)
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Fri Nov 5th, 2010 06:05 pm |
|
3rd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Glad to hear SM is back up!
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 6th, 2010 02:50 am |
|
4th Post |
|
certified tech group 51 Fellow, Academy of Sublime Masters of Appliantology
|
Ya gotta love us rednecks, the customer called and was using the machine.... He put a large 'C'-clamp over the console and aligned the clamp with the start button and tightened the clamp, unit runs........he said he did three loads this way and the next load the unit stayed running after the start button was pushed ............... we will see.. ........ now I need to collect the rest of the moola ........... P.S. Reg. U S. . thanks for the tech sheet ........... Last edited on Sat Nov 6th, 2010 02:52 am by certified tech group 51 |
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 10th, 2010 03:59 am |
|
5th Post |
|
certified tech group 51 Fellow, Academy of Sublime Masters of Appliantology
|
Called the customer today to check-up on the dryer.. ( Want to collect the rest of the greenbacks )..............He said some times it will start and stay running after pushing the start button , other times he has to resort to using the 'C' clamp.............. F-40 is " Flashes if the communication between the machine control and motor control is lost " That is all fine and dandy but on this unit there is no ' motor control board '........... Only one motor for the blower and tumble, belt drive blower................... new board P/N W10111616 is an equal to the old part number........
|
||||||||||||||
| |||||||||||||||
Current time is 06:26 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > model number 110.67062600 dryer | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
