|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > whirlpool top load lsq9110pw2 |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| whirlpool top load lsq9110pw2 | Rate Topic |
| Author | Post |
|---|
| Posted: Thu Nov 4th, 2010 01:15 am |
|
1st Post |
|
brdmays Grasshopper
|
fills with water no spin or aggitate just buzzes. jumped lid switch. didnt fix. coupler good. replaced gear box with good (used one) from reputable dealer here. swapped motor out. took pump off. still nothing but buzz. sometimes tries to spin with pump off but verry verry slowly then shuts down and takes a bit before it will do anything again even the buzzing. (motor will spin when laying on floor disengaged. starting to sound like electrical issue to me possibly voltage issue? but where to check and what should voltage be? ( with pump off can spin entire assemly drum and all with a wrench from rear of motor.)
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Nov 4th, 2010 02:19 am |
|
2nd Post |
|
certified tech group 51 Fellow, Academy of Sublime Masters of Appliantology 
|
Do you have the schematic for that machine?? Should be in the console..................
|
|||||||||||||
| ||||||||||||||
| Posted: Thu Nov 4th, 2010 06:27 am |
|
3rd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
could be a bad Timer or a bad Speed Control Switch (could temporarily bypass it) LSQ9110PW2 Wiring Diagram
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Thu Nov 4th, 2010 06:34 am |
|
4th Post |
grey one
|
Only once in 24 years I found a faulty capacitor , but who knows...
|
|||||||||||||
| ||||||||||||||
| Posted: Thu Nov 4th, 2010 02:26 pm |
|
5th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Reg may be on to something-- I remember a popular failure on these machines a few years back was to energize both the hi and low speed windings at the same time. Can check for this at the timer, use the tech sheet that Reg supplied to locate the proper timer pins to check for voltage at. Should only be getting voltage at one speed winding at a time.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
||||||||||||||
| |||||||||||||||
Current time is 09:38 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > whirlpool top load lsq9110pw2 | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
