|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > GE Profile side by side PSC23SGRC ss |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| GE Profile side by side PSC23SGRC ss | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Nov 2nd, 2010 06:10 am |
|
1st Post |
|
paykel190 Grasshopper
|
What its doing is the temp control board is blinking along with dispenser board. I'm able to get the display lit up with off showing after I pressed the 2 buttons on the left side and pressed the turbo cool then raised the tempature at the same time after that the display stayed lit , then I adjusted temp to be 4 and then compressor tryed to start then stopped. what could be causing this can you give me schematics for the mainboard and tempature board at the top of the fridge section? Oiginally showing tempature and the lcd was bright dim bright dim then the display shows nothing have to press left side cold button and display comes back on then goes off. I need to know if both boards are bad or just one. I checked the relay/overload box on compressor and it has a rattle when I shook it. After reinstalling temp control board I could not get it to show any digits on the display except the bottom led labled set. I did see schamatics posted for ge profile but that link is bad. thank you in advance
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Nov 2nd, 2010 09:36 am |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
depending on the first 3 characters of your serial number, there may be a recall on the MotherBoard For service manuals and lots of other goodies, become an Apprentice==> http://apprentice.applianceguru.com  Uploaded with ImageShack.us
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Tue Nov 2nd, 2010 02:47 pm |
|
3rd Post |
|
paykel190 Grasshopper
|
HI the first three of the serial is DH4 Has this been recalled. Would the compressor not start if the overload relay is bad it tryed to start up then shut down?
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Nov 2nd, 2010 04:25 pm |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
nope, not on the recall, although the Start Relay rattle usually isn't good
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 3rd, 2010 05:01 am |
|
5th Post |
|
paykel190 Grasshopper
|
I changed out relay/ overload and same thing compressor try to start up then shuts off I hear no click. Also the hrs led is constantly blinking could that be some kind of fault code. That temp control board at the top of fridge is blinking along with the dispenser. I can adjust the fridge or freezer temp on display does this sound like a main board failure? I looked at schematics and they have no volt readings on them for the connectors with out any voltage readings I cant test the board. I was able to get temp to display off on fridge and freezer then raise temp and compressor tried to start for 1 or 2 sec. The temp board shows temps blinking bright dim bright dim then whole display turns off. I hear the water dispencer and the lights are on and no evap fan is on in freezer. I hope its not both boards. thank you
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 3rd, 2010 07:36 am |
|
6th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
J4 Pin 2 Red 12v DC J4 Pin 3 Ground
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
Current time is 02:50 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > GE Profile side by side PSC23SGRC ss | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
