|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Ge Dishwasher doesn't drain |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Ge Dishwasher doesn't drain | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Oct 23rd, 2010 11:16 pm |
|
1st Post |
|
zarfus Grasshopper
|
Have a GE dishwasher, GLD5860LSS. The dishes are not as clean as they should be, and there is a slight amount of wather left in the bottom of the tub. I can hear the water swishing around as it runs, so the pump is working. I took off the hose from the bottom to the sink and flushed it out using a garden hose, that was no help. I want to lift off the bottom cover off the drain, but I can't figure out how to dissassemble the thing and get my fingers in there. I can take off the sprayer, but then I'm looking at a screen and no screws. Do I have to take the entire pump motor off to get to the screens? The diagrams online for a ge are different than this unit. thanks, Dan
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Oct 24th, 2010 12:57 am |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
may be similar to PDW7880 (uses same Fine Filter) from PDW7880 service manual: Fine Filter, Sump Filter, and Sump The dishwasher must be removed from its installation to gain access to the sump. The sump must be removed to allow removal of the fine filter and sump filter. Circulation Pump Note: It is extremely important that the self-tapping ground-wire screw on the circulation pump is tightened securely. The dishwasher must be removed from its installation to gain access to the circulation pump. The circulation pump can be activated using service mode (refer to the Service Mode chapter).
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
Current time is 01:56 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Ge Dishwasher doesn't drain | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
