|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > maytag neptune washer mah5500bww . |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| maytag neptune washer mah5500bww . | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Oct 23rd, 2010 12:18 am |
|
1st Post |
|
miked42 Grasshopper
|
my serial# is A5966023cv. what i have noticed from looking this problem up is a burn on the motor control board or a blown fuse, but my board does not have a fuse on it.. i noticed on the jp4 connector has a blue corrosion on it and also on the board. wondering if that is the cause for the dr symbol. I tried to look for a new connector or even just the pins that go on the wires but am having no luck. the wires are blue, red and yellow with a white jumper on it.
____________________ Thankyou |
||||||||||||||
| |||||||||||||||
| Posted: Sat Oct 23rd, 2010 12:24 am |
|
2nd Post |
|
miked42 Grasshopper
|
sorry i meant the code was "LR". any help would be greatly appreciated wife is getting mad about not having her washer.
____________________ Thankyou |
|||||||||||||
| ||||||||||||||
| Posted: Sat Oct 23rd, 2010 05:06 am |
|
3rd Post |
|
miked42 Grasshopper
|
im aware i will prob need the convertion kit but im also looking for the wire harness that runs from machine control conn2 to the jp4 on the motor control board.. also would like to know if the blue corrosion on the jp4 connector would cause the "LR" signal to come on? stumped and frustrated. I would appreciate it. couldn't find the harness on the parts list.
____________________ Thankyou |
||||||||||||||
| |||||||||||||||
| Posted: Sat Oct 23rd, 2010 12:15 pm |
|
4th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Depending on how bad the corrosion is, you may just be able to clean it up. The bigger question is how did that corrosion get there; is there a leak? Take a photo and post it so we can see it. Use a free online image hosting service.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sat Oct 23rd, 2010 08:10 pm |
|
5th Post |
Tronicsmasta
|
your serial number is too new for the conversion kit... so if you need a motor control, you can order just the control.
____________________ It is never a bad thing to leave it to the professionals. Inexperience can lead to more damage or risk of injury. You can always call A&E Factory Service (1-800-905-9505), Sears(1-800-469-4663), or local service man you can trust (servicemagic.com). |
||||||||||||||
| |||||||||||||||
| Posted: Sat Oct 23rd, 2010 08:28 pm |
|
6th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
miked42 wrote: ... my board does not have a fuse on it.. should have a Fuse, but if it's blown, it's usually a bad Controller and/or Motor Tronicsmasta wrote: .. so if you need a motor control, you can order just the control. Motor Controller $ 224 click on picture  Motor w/ Controller $ 226 click on picture  "You do the math." 
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Oct 23rd, 2010 10:13 pm |
|
7th Post |
Tronicsmasta
|
as long as the person knows not to use the filter assembly... its just adds to the confusion...
____________________ It is never a bad thing to leave it to the professionals. Inexperience can lead to more damage or risk of injury. You can always call A&E Factory Service (1-800-905-9505), Sears(1-800-469-4663), or local service man you can trust (servicemagic.com). |
||||||||||||||
| |||||||||||||||
| Posted: Sat Oct 23rd, 2010 11:39 pm |
|
8th Post |
|
miked42 Grasshopper
|
Here are the pictures http://i45.photobucket.com/albums/f84/juliedesmarais/PA230152.jpg http://i45.photobucket.com/albums/f84/juliedesmarais/PA230157.jpg I don't see a fuse on the motor control board. Also, I need to find the wire harness from the connection #2 on the main board to the JP4 connector because I cut the JP4 connector off and can't put it back together. There is a crack in the tub seal, which is probably where the leak is coming from. I already ordered a new one from your site.
____________________ Thankyou |
|||||||||||||
| ||||||||||||||
| Posted: Sat Oct 23rd, 2010 11:42 pm |
|
9th Post |
Tronicsmasta
|
tub seal where? the tub cover seal or the rear bearing seal? and why on earth did you cut into the harness?!?
____________________ It is never a bad thing to leave it to the professionals. Inexperience can lead to more damage or risk of injury. You can always call A&E Factory Service (1-800-905-9505), Sears(1-800-469-4663), or local service man you can trust (servicemagic.com). |
||||||||||||||
| |||||||||||||||
| Posted: Sun Oct 24th, 2010 01:43 am |
|
10th Post |
|
miked42 Grasshopper
|
I thoght i could get new metal pins for the wires, put them in the connector and the plug it back into the motor control board, but i guess i was wrong.got a new gasket or seal the " big grey one " on the inside of the door because it was torn.Is their any way i can either get the 3 wire harness machine control conn2 to the jp4 on the motor control board. I realize now that it wasn't very smart of me. just need to fix it now Read more: maytag neptune washer mah5500bww . - The Laundry Appliance Repair Forum - Do-It-Yourself Appliance Repair Help - ApplianceGuru.com: The Samurai Appliance Repair Forums http://applianceguru.com/forum2/28093.html#ixzz138dEtzIu Get appliance parts at http://parts.fixitnow.com
____________________ Thankyou |
|||||||||||||
| ||||||||||||||
| Posted: Sun Oct 24th, 2010 05:46 am |
|
11th Post |
Tronicsmasta
|
can you take some pictures and upload it to imageshack.us and post the link here. i am not quite following you on what happened to the connector.
____________________ It is never a bad thing to leave it to the professionals. Inexperience can lead to more damage or risk of injury. You can always call A&E Factory Service (1-800-905-9505), Sears(1-800-469-4663), or local service man you can trust (servicemagic.com). |
||||||||||||||
| |||||||||||||||
Current time is 05:04 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > maytag neptune washer mah5500bww . | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
