|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag Atlantis Washer Wont Fill |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Maytag Atlantis Washer Wont Fill | Rate Topic |
| Author | Post |
|---|
| Posted: Fri Sep 17th, 2010 04:45 am |
|
1st Post |
|
ancel1930 Grasshopper
|
Maytag Atlantis Washer Model Number: MAV 7258 AWQ I've changed the water inlet valve, checked the power and water supply, but the washer still won't fill. It will spin, but it won't fill with water How do I check to see if the valve is receiving power?
|
||||||||||||||
| |||||||||||||||
| Posted: Fri Sep 17th, 2010 12:11 pm |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
check for voltage across the terminals for your corresponding water setting, hot or cold. the thermistor (attached to the black nipple of the valve) tell the timer or board when to open and close the appropriate valve to achieve a desired temperature. most likely your temp. board is bad. It could be your timer or a wiring issue as well. I'll have to look at your schematic in a bit. Board Link 
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Fri Sep 17th, 2010 04:26 pm |
|
3rd Post |
|
ancel1930 Grasshopper
|
Thanks, I checked the wiring leading from the timer to the thermistor for continuity. It gave me a reading of 30. I'm not sure if that is a good sign and a correct reading. Or a bad sign that I'm getting to much resistance and the wires should be replaced
|
||||||||||||||
| |||||||||||||||
| Posted: Fri Sep 17th, 2010 05:08 pm |
|
4th Post |
|
ancel1930 Grasshopper
|
Hi, After reading your reply, I took a look at the Temp Board. While doing so, I noticed that the wiring connector to the timer was not totally seated....It was only partially seated I took the connector off, re-seated it securely, plugged the washer in, and pulled the timer....Water began to flow  If you hadn't mentioned the Temp Board, I would have never noticed the loose conection at the timer Thank you very much....Life is good...God bless you
|
|||||||||||||
| ||||||||||||||
| Posted: Fri Sep 17th, 2010 08:49 pm |
|
5th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
Glad to help
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Sat Sep 18th, 2010 02:25 am |
|
6th Post |
|
ancel1930 Grasshopper
|
Now another problem has arisen. The Delicate Cycle wont work. The washer fills, but when the timer advances it wont agitate. The other cycles work perfectly...Fill, Agitate, Spin, Rinse, Final Spin. Everything. But when I put it on Delicate....nada
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Sep 18th, 2010 02:29 am |
|
7th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
seems like the Timer Connector again, or one individual wire connector
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Sat Sep 18th, 2010 03:21 am |
|
8th Post |
|
ancel1930 Grasshopper
|
Good lord...I'll unplug it and plug it in again Thanks
|
|||||||||||||
| ||||||||||||||
Current time is 02:38 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag Atlantis Washer Wont Fill | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
