|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Top Loader Washing Machine Grinding Noise |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Top Loader Washing Machine Grinding Noise | Rate Topic |
| Author | Post |
|---|
| Posted: Thu Aug 26th, 2010 01:55 am |
|
1st Post |
|
stunning Grasshopper
|
This is a Brastemp Top loading washing machine bought in 2007. Its called a Tira Manches 9kg model. Machine works fine until it gets to the spin cycle and the I get the noise you be be able to see in the video link below after 20secs. Pretty sure its coming from the plastic toothed clutch mechanism that is actuated by a cable that is is pulled by a small electric motor. Any ideas. Problem started after a badly balanced load (pillow), dont know its co-incidence or caused the problem. http://www.youtube.com/watch?v=kQ62jKKIOYM
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Aug 26th, 2010 02:00 am |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
yes it does sound like a clutch mechanism or slipping plastic gearing. Don't have any tech info. or parts look up for this unit.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Thu Aug 26th, 2010 02:07 am |
|
3rd Post |
|
stunning Grasshopper
|
When the cable puller (top right) moves to the right pulling against the spring it is actually engaging the clutch and releasing the band brake at the same time. During the spin this cable appears to release and then actuate again (engaging the clutch while the drun is still spinning) could it be possible this cable puller is faulty. (cable puller also known as a brake actuator)
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Aug 26th, 2010 02:09 am |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
anything caught between the Tub and Basket ? for reference: division of Whirlpool Brazil LAVADORA BRASTEMP TIRA MANCHAS 9 KG ![]()
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Thu Aug 26th, 2010 02:13 am |
|
5th Post |
|
stunning Grasshopper
|
Yep thats the correct machine.
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Aug 26th, 2010 12:07 pm |
|
6th Post |
|
Budget Appliance Repair Fellow, Academy of Sublime Masters of Appliantology
|
Looks to me like the spin engage solenoid is for some reason losing power, either breaking down under a load, controller problem or maybe a broken or loose wire to the solenoid that as it spins jostles around and loses connection.
____________________ William Burk (Willie) Willie's Budget Appliance Repair Eureka, CA 95501 |
|||||||||||||
| ||||||||||||||
| Posted: Fri Aug 27th, 2010 04:53 am |
|
7th Post |
|
stunning Grasshopper
|
cheers for the tip Budget "Appliance Repair" PROBLEM FIXED! I checked the continuity of the 2 wires going to cable puller motor. They both went to the water drain pump, where they picked up there power there. The wire had a bad connection. I cut the wire off and resoldered it onto the puch on connecter. Now its fine. Ha Ha, fixed it!!!
|
||||||||||||||
| |||||||||||||||
| Current time is 09:18 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Top Loader Washing Machine Grinding Noise | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com