|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore 110- 86874800 wont stop running. |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! | Page: 1 2 3   |
|
||||||||||||
| Kenmore 110- 86874800 wont stop running. | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Jul 6th, 2010 11:07 pm |
|
1st Post |
|
krazyk011 Grasshopper
|
So in both timed and automatic mode, my dryer timer will turn like normal, but it reaches a point right before the off position where it just stops turning and the dryer continues to run. If the dial is manually turned to off it will stop. It only starts if I press and hold the start button like normal. Is this a resistor problem or timer issue? I am confused after reading all of the posts! thanks Kyle
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jul 6th, 2010 11:26 pm |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
Sounds like a resistor, I can't view your model at the moment though.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Wed Jul 7th, 2010 12:04 am |
|
3rd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
yes yours has a resistor Resistor Link yours will look different (probably either straight and black or round and black usually attached to the timer mounting screw or right in that area.) I cant pull up a wiring diagram for this unit..if you have your it should show it on there and its value..like 15K i think..most of the time on the old one you can actually see a bulge on it were its blown.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Wed Jul 7th, 2010 12:32 am |
|
4th Post |
|
krazyk011 Grasshopper
|
Awesome thanks. Can I replace the old one with this new straight resistor? Also, any tips on finding this part for sale?
|
|||||||||||||
| ||||||||||||||
| Posted: Wed Jul 7th, 2010 02:37 am |
|
5th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
yep, you will have to cut and splice...the link for the part is in my last post "Resistor Link"
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Wed Jul 7th, 2010 03:24 am |
|
6th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
110.86874800 do you have a wiring diagram for that model that you could post (somewhere) ?
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Wed Jul 7th, 2010 05:18 am |
|
7th Post |
|
krazyk011 Grasshopper
|
one update: timer is not advancing when in the auto dry mode. It only advances in the timed dry mode. Does this change things?
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Jul 7th, 2010 05:48 am |
|
8th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
It doesn't advance at all in the auto dry mode? Does it shut off at the end of the timed dry mode?
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Wed Jul 7th, 2010 05:50 am |
|
9th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
krazyk011 wrote: one update: timer is not advancing when in the auto dry mode. It only advances in the timed dry mode.... now I agree ... 4700 OHMs (4.7k) at least 5 Watts
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Wed Jul 7th, 2010 11:21 am |
|
10th Post |
|
krazyk011 Grasshopper
|
no advancing in the auto dry mode. does not reach the off position in timed dry mode. never shuts off
|
|||||||||||||
| ||||||||||||||
| Posted: Wed Jul 7th, 2010 12:38 pm |
|
11th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
Resistor Time
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Wed Jul 7th, 2010 02:36 pm |
|
12th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
RegUS_PatOff wrote: do you have a wiring diagram for that model that you could post (somewhere) ?
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Thu Jul 8th, 2010 02:22 am |
|
13th Post |
|
krazyk011 Grasshopper
|
RegUS- I have no wiring diagram if your asking me. appl- Are you saying that it is still that same resistor?
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Jul 8th, 2010 02:27 am |
|
14th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
yes
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 11th, 2010 08:04 pm |
|
15th Post |
|
krazyk011 Grasshopper
|
ok, so where is this resistor anyway? Took off the upper and lower rear panels and did not see it. is it on the side somewhere?
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 11th, 2010 08:10 pm |
|
16th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
It's next to, and connected to the Timer. It may look different. You could test it if you had a meter.
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 11th, 2010 08:21 pm |
|
17th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
appl.tech.29501 wrote:yes yours has a resistor
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 11th, 2010 08:21 pm |
|
18th Post |
|
krazyk011 Grasshopper
|
ok, and is the timer the part connected to the timer knob on the top access panel?
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 11th, 2010 08:23 pm |
|
19th Post |
|
krazyk011 Grasshopper
|
i havent seen anything obvious looking like either type of resistor.
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 11th, 2010 08:32 pm |
|
20th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
RegUS_PatOff wrote: It may look different.
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
Current time is 05:35 pm
|
Page: 1 2 3 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore 110- 86874800 wont stop running. | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
