|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag MAV7650AWW won't spin |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Maytag MAV7650AWW won't spin | Rate Topic |
| Author | Post |
|---|
| Posted: Sun Jul 4th, 2010 01:48 am |
|
1st Post |
|
texassteve Grasshopper
|
My washer makes squealing noises on large loads, then today it stopped spinning all together. I got underneath it and had my wife watch the agitator and drum while i spun the large white pulley underneath. When i spun the pulley counterclockwise both the agitator and drum spun, when i spun the pulley clockwise the agitator spun. I did notice a smell coming from the washer, almost like it was electrical. Any ideas? Steve
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 4th, 2010 01:56 am |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
does the pump pulley turn freely in both directions with out the belt on it?
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 4th, 2010 02:00 am |
|
3rd Post |
|
texassteve Grasshopper
|
yes the pump pulley turns freely, although it does sound like it rubs a little. i took it off and looked at it and cleaned it real well but still sounds like it is rubbing, just barely though.
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 4th, 2010 02:03 am |
|
4th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
rubbing internally or externally? look between the pump base plate and the pump pulley. do you see a shiny piece of wavy metal in there? if so pump is shot. will the motor on the machine now run with the belt off?
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 4th, 2010 02:08 am |
|
5th Post |
|
texassteve Grasshopper
|
I do see metal between the pulley and the base plate. Can i turn the machine on without the pump on it? I am asking if i should try that?
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 4th, 2010 02:13 am |
|
6th Post |
|
texassteve Grasshopper
|
yes, i just turned it on and the motor runs just fine without the pump or the belt on the machine.
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 4th, 2010 02:15 am |
|
7th Post |
|
kdog Fellow, Academy of Sublime Masters of Appliantology 
|
RepairClinic part # for pump = 1480289
____________________ Can Ye spare some 'cutter me brutha ? http://web.me.com/zenzoidman/kdog/ |
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 4th, 2010 02:17 am |
|
8th Post |
|
texassteve Grasshopper
|
So do you think this is also what is causing it not to spin? A bad pump?
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Jul 4th, 2010 02:23 am |
|
9th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
if you see the shiny metal the pump is binding. the friction is causing the squeeling as well as additional drag on the motor in turn tripping on the thermal over load. the pump is probably all you need.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Sun Jul 4th, 2010 02:24 am |
|
10th Post |
|
texassteve Grasshopper
|
You have been a great help. I will have to wait until monday more than likely to find someone with the part in stock since the holiday is tomorrow. i will post a reply when i get it running. Thanks a bunch and have a great 4th of July!!
|
|||||||||||||
| ||||||||||||||
| Posted: Mon Jul 5th, 2010 10:43 pm |
|
11th Post |
|
texassteve Grasshopper
|
the washer is running again. That was all i needed was anew drain pump. Again, thanks for the guidance.
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Jul 5th, 2010 11:00 pm |
|
12th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
My pleasure, have a cold one.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
Current time is 12:04 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag MAV7650AWW won't spin | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
