|
|
|
FAQs | Parts | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > oven range temperature setting begin at 177 and end at 287 |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, appl.tech.29501 |
|
|
|||||||||||||
| oven range temperature setting begin at 177 and end at 287 | Rate Topic |
| Author | Post |
|---|
| Posted: Mon Dec 7th, 2009 09:14 pm |
|
1st Post |
|
lrning Senior Apprentice Appliantologist
|
Hi Frigidaire oven range glass top 4 burners work ok, oven is the problem temperature setting always begin at 177 and end at 287 cannot go pass this setting number. model: FEF365BUB SERIAL NUMBER VF24648179 Also with error code F3. is it the ECR or the sensor? seem like the ECR to me, sensor does not prevent setting of temperature!!!!
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Dec 7th, 2009 10:03 pm |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
Fault sode suggests sensor how ever I agree seems like erc to me, disconnect your sensor and OHM it out 1050 to 1150 @ room temp., check it. For a short as well and check erc connection for corrosion Last edited on Mon Dec 7th, 2009 10:09 pm by appl.tech.29501 ____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Mon Dec 7th, 2009 10:47 pm |
|
3rd Post |
|
lrning Senior Apprentice Appliantologist
|
thank you for the quick response. sensor is 1099 room temperature and 1580 when hot please tell me how to access to the erc.
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Dec 7th, 2009 11:06 pm |
|
4th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
just remove the back cover about 6 screws or so
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Mon Dec 7th, 2009 11:45 pm |
|
5th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology 
|
Sounds to me like you are in Celsius mode. Either your use and care or tech sheet should tell you how to get back into Fahrenheit. 177C = 350F 287C = 550 or so Fahrenheit. These would be the normal starting point of the clock and highest allowable temp of the oven (550F).
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
||||||||||||||
| |||||||||||||||
| Posted: Mon Dec 7th, 2009 11:54 pm |
|
6th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology
|
Here you go... To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): 1. Press Broil . "— —" appears in the display. 2. Press and hold the up temp arrow until "HI" appears in the display. 3. Press and hold Broil until °F or °C appears in the display. 4. Press the Up or Down arrows to change °F to °C or °C to °F. 5. Press any control pad to return to normal operating mode.
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
| Posted: Mon Dec 7th, 2009 11:55 pm |
|
7th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
Temperature conversion: The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170° F to 550° F (65° C to 287° C Celsius). To change the temperature from °F to °C or from °C to °F: NOTE: Control should not be in a Bake or Clean mode. 1. Press Broil. "— —" appears in the display. 2. Press and hold the Up Arrow until "HI" appears in the display. 3. Press and hold Broil until °F or °C appears in the display. 4. Press the Up Arrow or Down Arrow to change °F to °C or °C to °F. 5. Press any control pad to return to normal operating mode. NOTE: The time of day must first be set in order to operate the oven. Last edited on Mon Dec 7th, 2009 11:56 pm by appl.tech.29501 ____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Tue Dec 8th, 2009 12:00 am |
|
8th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology
|
Got you by one second appl.tech.29501 
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
| Posted: Tue Dec 8th, 2009 12:03 am |
|
9th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
dang...you fast 
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Tue Dec 8th, 2009 11:33 am |
|
10th Post |
|
lrning Senior Apprentice Appliantologist
|
how do I set time of day? I will do the temperature C to F about noon today. When I plug the power in, 12:00 flashing, what is the next step? press and hold ?
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Dec 8th, 2009 11:40 am |
|
11th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
Hit clock...set time....hit clock
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Tue Dec 8th, 2009 02:32 pm |
|
12th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
FEF365BUB Use & Care Manual
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Tue Dec 8th, 2009 05:15 pm |
|
13th Post |
|
lrning Senior Apprentice Appliantologist
|
thank you for the manual great
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Dec 8th, 2009 09:39 pm |
|
14th Post |
|
lrning Senior Apprentice Appliantologist
|
I have a hard time with this oven range. now it give me F1 when power up. and the oven door is locked. I don't know how to move the motor to unlock the door. after I press "Clear" to get rid of F1, the "Clean" LED (Green) is on, constant on and door is locked. it displays time which begin with 12:00 I cannot change time because it is in clean mode. when I press Broil and Bake, it display "dr" (guess translate to door) my questions are what is F1? and how to move the motor to open oven door? this oven is very close to be on the side of the street for metal pick up.
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Dec 8th, 2009 09:56 pm |
|
15th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
F1 means the control is defective.....replace control
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Tue Dec 8th, 2009 11:34 pm |
|
16th Post |
|
lrning Senior Apprentice Appliantologist
|
what is the best used of a oven range with a defective control? economically, it is not good to replace control !!! >$150 do you sell it as scrap metal?
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Dec 8th, 2009 11:52 pm |
|
17th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
depends on the condition of the range and the amount of money you have....you definitely cant buy a range for $150 Last edited on Tue Dec 8th, 2009 11:52 pm by appl.tech.29501 ____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Wed Dec 9th, 2009 01:02 am |
|
18th Post |
|
kdog Fellow, Academy of Sublime Masters of Appliantology 
|
Another option is to remove your control, and send it away to the folks at FixYourBoard.com to have it repaired
____________________ Can Ye spare some 'cutter me brutha ? http://web.me.com/zenzoidman/kdog/ |
|||||||||||||
| ||||||||||||||
| Posted: Wed Dec 9th, 2009 11:38 am |
|
19th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
FEF365BUB Tech Sheets FEF365BUB Parts List & Diagrams SERVICE MANUAL NEXT GEN 30” ELECTRIC FREESTANDING RANGES
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
||||||||||||||
| |||||||||||||||
| Current time is 07:28 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > oven range temperature setting begin at 177 and end at 287 | Top |
FAQs | Parts | Store | Newsletter | Sitemap | Beer | Fixitnow.com
