|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > KitchenAid KUDE03FTWHI - Flashing "Clean" Light. |
Konnichiwa and Welcome!Please register or watch this short screencast on how to get started here.
|
| Moderated by: RegUS_PatOff, Pegi |
|
|
|||||||||||||
| KitchenAid KUDE03FTWHI - Flashing "Clean" Light. | Rate Topic |
| Author | Post |
|---|
| Posted: Fri Nov 6th, 2009 10:47 pm |
|
1st Post |
|
Zulu95 Senior Apprentice Appliantologist
|
Everything appears to work OK for 6-9 minutes then it stops and flashes the "Clean" Light. We have checked the filter and cleaned it and the float seems to work OK. That's it for the customer manual advice. Of course it is just out of warranty!!
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 7th, 2009 12:42 am |
|
2nd Post |
|
Zulu95 Senior Apprentice Appliantologist
|
UPDATE! 8 flashes followed by 1 flash. It ran for around 13 minutes. (I timed it not my wife.) Anybody any ideas?
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 7th, 2009 01:08 am |
|
3rd Post |
|
kdog Fellow, Academy of Sublime Masters of Appliantology 
|
Check the tech sheet which is underneath the kickplate
____________________ two wrongs don't make a right,but three lefts do. |
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 7th, 2009 02:33 am |
|
4th Post |
|
Zulu95 Senior Apprentice Appliantologist
|
Thanks, working my way through the list at present. How much play should there be in the lower sprayer arm? KitchenAid don't seem to be made very well now.
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 7th, 2009 04:01 am |
|
5th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
Code 8-1 Low Water, etc ... What's the Water level ? just touching the Heater Element ? may be weak Water Inlet Valve, or clogged screen.
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 7th, 2009 03:18 pm |
|
6th Post |
|
Zulu95 Senior Apprentice Appliantologist
|
Thanks. Going to check that today. How do you check level with the door open? TIA
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 7th, 2009 03:26 pm |
|
7th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
RegUS_PatOff wrote: ... just touching the Heater Element ...
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 7th, 2009 03:35 pm |
|
8th Post |
|
Zulu95 Senior Apprentice Appliantologist
|
How do I get it to fill with the door open? Is there an override or some trick I do not know? Thanks. Last edited on Sat Nov 7th, 2009 03:36 pm by Zulu95 |
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 7th, 2009 03:35 pm |
|
9th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Actually, on this model, water level should be a about a finger width below the heating element.
____________________ Links: Parts | FAQs | Store | Beer | Home |
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 7th, 2009 03:56 pm |
|
10th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
Zulu95 wrote: How do I get it to fill with the door open? Is there an override or some trick I do not know? let it fill with the Door closed... after it starts to Wash, open the Door and check the Water Level.
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 7th, 2009 03:58 pm |
|
11th Post |
|
Zulu95 Senior Apprentice Appliantologist
|
Got it. Thanks
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 7th, 2009 11:14 pm |
|
12th Post |
|
Zulu95 Senior Apprentice Appliantologist
|
FINAL RESULT. Checked water supply as recommended by RegUS_PatOff and found little or no water in the bottom. Pulled the machine and thereby found the problem. The stainless braided water hose had got wedged between the wall and the hardwood floor and was almost flat. Pulled the inlet valve and cleaned a little grit out of the screen. Had to go to the local hardware store and get a new hose. Refitted same and installed everything back in and the machine is just finishing a full wash cycle. MANY THANKS to all.
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Nov 10th, 2009 07:28 am |
|
13th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
____________________ Links: Parts | FAQs | Store | Beer | Home |
||||||||||||||
| |||||||||||||||
| Current time is 12:26 pm | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > KitchenAid KUDE03FTWHI - Flashing "Clean" Light. | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home
