Old Lennox GH6-100T Furnace - Heating, Ventilation, and Air Conditioning (HVAC) - Do-It-Yourself Appliance Repair Help - ApplianceGuru.com: The Samurai Appliance Repair Forums

ApplianceGuru.com: The Samurai Appliance Repair Forums Home

ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Heating, Ventilation, and Air Conditioning (HVAC) > Old Lennox GH6-100T Furnace

Konnichiwa and Welcome!

Please register or watch this short screencast on how to get started here.

SEARCH THIS SITE
We have a bizillion pages of specific appliance repair questions and answers here just aching for the furtive caress of your engorged and tingling eyeballs. Use this search box to find ‘em.

FIND PARTS FAST
Search by part number or model number. You can also search by appliance type, brand, or even the type of part.

Moderated by: RegUS_PatOff, Pegi, hvacdrd, applianceman18007260692

New Topic

Printer Friendly

Old Lennox GH6-100T Furnace

Rate Topic

Author	Post

Posted: Tue Nov 3rd, 2009 06:41 am

Quote

1^st Post

kdog
Fellow, Academy of Sublime Masters of Appliantology

Joined:	Sun May 8th, 2005
Location:	Calgary, Alberta Canada
Posts:	1681
Flavorite Brew:	dickens cider
Status:	Offline

I have a Lennox of the 1959 vintage, and it's been such a good unit. As I performed some maintainence on it today, I noticed that the blower shaft bearings are showing wear, as well as giving off a bit of vibration (also enhanced by hardening motor mount grommets). Does anybody know of a good source of parts for these babies?

It's a very simple unit and performs adequately enough that I'd like to keep it runnin' as long as possible. To replace it would mean a whole new can of worms as I use a masonary chimney and do not have a combustion air vent built in the house.

Specifically I would look at the purchase of an entire blower ass'y if available, as well as the fan switch, limit switch etc. The Blower ass'y # is H210 - 3/4

____________________
two wrongs don't make a right,but three lefts do.

Quote

Posted: Tue Nov 3rd, 2009 11:41 pm

Quote

2^nd Post

Shootist
Master Appliantologist

Joined:	Mon Nov 2nd, 2009
Location:
Posts:	10
Flavorite Brew:	coors light
Status:	Offline

I'd be amazed if you found much beyond replacement bearings and belts and these would be aftermarket. There's no way Lennox or any other manufacturer would still have a blower assembly for a 50 year old furnace.

I'm sure that old monster heats just fine but I think you'd be pleasantly surprised at the lower gas consumption and safety of any new model. I pray at the very least that you have a CO detector in your home.

Quote

Current time is 01:10 pm
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Heating, Ventilation, and Air Conditioning (HVAC) > Old Lennox GH6-100T Furnace	Top

Your Sometimes-Lucid Host:

"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly, spilling my steaming entrails onto your floor."