Anyone have a Fisher Paykel Dishdrawer (dd603) main PCB Schematic? - The Kitchen Appliance Repair Forum - Do-It-Yourself Appliance Repair Help - ApplianceGuru.com: The Samurai Appliance Repair Forums

ApplianceGuru.com: The Samurai Appliance Repair Forums Home

ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Anyone have a Fisher Paykel Dishdrawer (dd603) main PCB Schematic?

Find Appliance Parts & Diagrams Here

Enter a model number, part number, type of appliance, brand, or even a part description.

365-day return policy on all parts ordered through this site!

Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501

Search Our Sites for More Info!

New Topic

Printer Friendly

Anyone have a Fisher Paykel Dishdrawer (dd603) main PCB Schematic?

Rate Topic

Author	Post

Posted: Sat Feb 21st, 2009 01:57 am

Quote

1^st Post

mattcall
Senior Apprentice Appliantologist

Joined:	Wed Nov 26th, 2008
Location:
Posts:	4
Flavorite Brew:	long trail
Status:	Offline

Does anyone have a Fisher Paykel Dishdrawer (dd603) main PCB Schematic?

I am having a problem with one of the transistors that drive the dispenser solenoids. It keeps melting down! I could probably diagnose the culprit component(s) on the board, and it would be infinitely easier if I had the schematic for the board (and for the other boards in the system (chassic pcb, LCD pcb, main pcb).

Does anyone have these? This would probably be an inside job - any F&P engineers out there?

Anyone else have this problem?

Thanks!

Quote

Posted: Sat Feb 21st, 2009 02:00 am

Quote

2^nd Post

mattcall
Senior Apprentice Appliantologist

Joined:	Wed Nov 26th, 2008
Location:
Posts:	4
Flavorite Brew:	long trail
Status:	Offline

By the way, its the Rohm D1867 npn transistor that keeps melting down and frying the solenoid coils at the same time.

Quote

Posted: Sat Feb 21st, 2009 03:28 am

Quote

3^rd Post

RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology

Joined:	Sat Sep 24th, 2005
Location:	Milwaukee, Wisconsin USA
Posts:	16509
Flavorite Brew:	Indian Head. Black & White
Status:	Offline

mattcall wrote: Does anyone have a Fisher Paykel Dishdrawer (dd603) main PCB Schematic? ...
good luck

The Transistor and the Solenoid both go bad ?

There may be something wrong with the 24v DC power supply.

You'd probably have to draw the schematic yourself ...

____________________
The new repair forums==> http://appliantology.org

RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw

my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA

Quote

Posted: Sat Feb 21st, 2009 02:05 pm

Quote

4^th Post

mattcall
Senior Apprentice Appliantologist

Joined:	Wed Nov 26th, 2008
Location:
Posts:	4
Flavorite Brew:	long trail
Status:	Offline

I am suspecting the 24v supply too. Do you know if that is on the same pcb or is it down below on the chassis pcb?

The transistor literally burns up and melts down on the board. But it works long enough to fry the solenoid coil (it now measures 0 ohms vs about 70 ohms b4).
I did have 2 extra solenoids from replacing the dispenser, but now I'm out of extras.

Both the upper and lower boards seem to have solenoid problems, but only the top one burns up...

Any more tips would be great.

Thanks!

matt

Quote

Current time is 02:24 pm
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Anyone have a Fisher Paykel Dishdrawer (dd603) main PCB Schematic?	Top

Find Appliance Parts & Diagrams Here

Enter a model number, part number, type of appliance, brand, or even a part description.

365-day return policy on all parts ordered through this site!

Your Sometimes-Lucid Host:

"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly, spilling my steaming entrails onto your floor."