|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > LG LDS5811WW Diswasher problem but not throwing codes |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! | Page: 1 2 3 4 |
|
||||||||||||
| LG LDS5811WW Diswasher problem but not throwing codes | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Feb 21st, 2009 09:19 pm |
|
61st Post |
|
domer2k9 Senior Apprentice Appliantologist
|
No apparent blockages...The heater seems to be ok.....When I run diag. for the wash pump test and the wash-drain-water supply test I get some bells and CE flashing on display. That wasn't happening before, does it mean anything significant?
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Feb 24th, 2009 11:18 pm |
|
62nd Post |
|
domer2k9 Senior Apprentice Appliantologist
|
Oh and the board is fine....In fact I swapped out PCB's and it didn't solve the problem. So here is my last question for you guys.....based on what we know should I get a motor or sump assy. and try replacing that myself or just bite the bullet and call someone. Thanks once again
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Mar 10th, 2009 02:15 am |
|
63rd Post |
|
domer2k9 Senior Apprentice Appliantologist
|
Found this deteriorated seal in the sump....... Attachment: seal.jpg (Downloaded 46 times)
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Mar 24th, 2009 01:47 am |
|
64th Post |
|
domer2k9 Senior Apprentice Appliantologist
|
It was the motor....darn thing is a 310 volt DC inverter controlled piece of crap!!!
|
|||||||||||||
| ||||||||||||||
| Posted: Thu Mar 26th, 2009 05:25 am |
|
65th Post |
|
TX Mom Grasshopper
|
This particular model has enough problems with the motor and flow sensor - they don't even make it two years! My motor also siezed up, but I don't have enough confidence that the d/w won't break again; so I'm buying a new one vs. replacing the motor. Good Luck!
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Apr 6th, 2009 09:14 pm |
|
66th Post |
|
clman Master Appliantologist
|
LG diswashers do not display a code for RPMs that a slightly lower than normal. The also do not display codes for over RPM. The LE code will appear if the motor is locked or nearly stopped. Washing capability will diminish if the internal water heater does not fuction ( indicated by a lack of steam or lowering interior water temps. through the progression of individual cycles), If the motor is failing, & if the water temp. and amount of detergent used are right and the detergent is dispensing properly. The soil sensor can also cause this but is impossible to properly troubleshoot. The soil sensor is part of the sump assy. along with the motor.
____________________ 25 Years in the biz. 9 years LG authorized. |
|||||||||||||
| ||||||||||||||
| Posted: Sun Jan 10th, 2010 03:56 pm |
|
67th Post |
|
domer2k9 Senior Apprentice Appliantologist
|
Update Replaced sump assy.....still not working. Washing dishes by hand and using DW as drying vessel. Does anyone have any creative uses for a like new, broken down, tall tub DW? Thanks
|
||||||||||||||
| |||||||||||||||
| Current time is 08:49 am
|
Page: 1 2 3 4 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > LG LDS5811WW Diswasher problem but not throwing codes | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com