Posted: Fri Apr 15th, 2005 10:24 pm

1st Post

whatmuseum Lurking at the Threshold   Joined:  Location:    Posts:  Flavorite Brew:  Status:  Offline

Kenmore model 110.82372120 I replaced the wig-wag and plungers on this washer several weeks ago and I have noticed that it spins and agitates simultaneously after that work, never before. Last night I got down and watched the wig-wag work its magic while running it through a few cycles. From observing said magic, I learned what is happening, just don't know what my next steps are. If I manually move the plunger on the spin coil to the "down" (or out) position (while also ensuring the cam/glide bar is in correct position), it agitates like normal. The washer cycles through everything fine for that load, but on the next load it will not reset the plunger to the "down" position, causing it to spin and agitate at the same time when it should just be agitating. Movement on the agitate coil is normal. Long and short of it: Spin coil plunger works fine to shift into spin, but doesn't shift back out. What do I do now? Suggestions, anyone? Josh

Back To Top

Posted: Sun Jan 20th, 2008 04:29 pm

3rd Post

dadler Lurking at the Threshold   Joined:  Location:    Posts:  Flavorite Brew:  Status:  Offline	hello - i have this problem too - i replaced the wigwag and now it spins and agitates together in the wash cycle - also one of the plungers (the rince one i think) appears to be stuck in the upper slot - did you ever find a solution to your problem?
Back To Top

Your Sometimes-Lucid Host:

"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly, spilling my steaming entrails onto your floor."