|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag DG 412 series 02 gas dryer |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Maytag DG 412 series 02 gas dryer | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Jun 17th, 2008 10:35 am |
|
1st Post |
|
clovisman Senior Apprentice Appliantologist
|
Hello- My gas dryer isnt drying! The pilot ignition lights up when the dryer is started, but the gas burner never ignites!
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 17th, 2008 10:39 am |
|
2nd Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology 
|
What we need to know is your igniter glowing at all times when you start it, or does it shut off and come back on every minute or so.
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
| Posted: Tue Jun 17th, 2008 10:41 am |
|
3rd Post |
|
clovisman Senior Apprentice Appliantologist
|
The ignitor comes on for a period and then shuts off.........
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 17th, 2008 12:03 pm |
|
4th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology
|
If your igniter comes on for a minute, then shuts off, and continues to repeat this process, your coils are bad, you have no gas to your unit, or something has clogged the orifice hood where the gas comes out (spider, other critter as we say here in Georgia) Your unit took two different valve assemblies. I believe the coil kit you need is listed below. The coils are located on the valve assm and have a metal cover holding them down. If yours have a plastic plug going to each of them, and the coils are like the ones shown below, one two wire, one three, then this kit is your boy. If there is no plug, and the wires appear to go right into the coil, you will need a different kit. http://www.repairclinic.com/referral.asp?R=154&N=3479 
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
| Posted: Tue Jun 17th, 2008 01:24 pm |
|
5th Post |
|
clovisman Senior Apprentice Appliantologist
|
The ignitor only comes on once when you start the dryer up. It doesnt keep coming on..............
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 17th, 2008 01:41 pm |
|
6th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
Will the Igniter come on again right away if you hit the Start Button again ? Will the Igniter eventually come on again by itself ?
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Tue Jun 17th, 2008 02:40 pm |
|
7th Post |
|
clovisman Senior Apprentice Appliantologist
|
Ignitor will NOT come back on by itself, but if you turn off dryer wait a few seconds and restart, the ignitor will come back on.
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 17th, 2008 02:42 pm |
|
8th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology
|
The igniter only comes on once? Let it run for a 5-10 minutes or so to be sure. If not, we have to get a meter out and do some checks.
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
| Posted: Tue Jun 17th, 2008 02:45 pm |
|
9th Post |
|
clovisman Senior Apprentice Appliantologist
|
I've let it run for 10-20 minutes with no results, and pretty sure the ignitor only comes on once during the initial start-up.
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 17th, 2008 03:01 pm |
|
10th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology
|
If you are not with the unit, we probably want to double check. If it turns out it only comes on once, we will need to grab a meter and do some checks. If the unit has a time dry, start it in time dry 50 minutes for the igniter frequency and any checks we might do.
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
| Posted: Tue Jun 17th, 2008 08:07 pm |
|
11th Post |
|
clovisman Senior Apprentice Appliantologist
|
Okay- I stand corrected. the ignitor does come back on every couple of minutes.......
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 17th, 2008 10:22 pm |
|
12th Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology
|
If it comes on and off without lighting, then my prior post and parts shoudl be your daddy.If your igniter comes on for a minute, then shuts off, and continues to repeat this process, either your coils are bad, you have no gas to your unit, or something has clogged the orifice hood where the gas comes out (spider, other critter as we say here in Georgia) Your unit took two different valve assemblies. I believe the coil kit you need is listed below. The coils are located on the valve assm and have a metal cover holding them down. If yours have a plastic plug going to each of them, and the coils are like the ones shown below, one two wire, one three, then this kit is your boy. If there is no plug, and the wires appear to go right into the coil, you will need a different kit. http://www.repairclinic.com/referral.asp?R=154&N=3479
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||||||
| ||||||||||||||
Current time is 04:15 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag DG 412 series 02 gas dryer | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
