|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Amana B136CAL1 Refrigerator problems |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! | Page:   1 2 3 |
|
||||||||||||
| Amana B136CAL1 Refrigerator problems | Rate Topic |
| Author | Post |
|---|
| Posted: Wed Aug 6th, 2008 09:35 pm |
|
41st Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
check your schematic, most Amanas are built with the power for evap. fan running through the defrost thermostat (known problem with Amanas) as well as the defrost heater. with that being said your temps are not cold enough as well and Amana's are also notorious for sealed system leaks in the evaporator....better off scrapping this one and buying a new frige in my opinion.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Thu Aug 7th, 2008 12:20 am |
|
42nd Post |
|
v8_ranch Senior Apprentice Appliantologist
|
But wouldn't I see a leak in there after adding the dye yesterday? I do not see any leaks anywhere...
|
|||||||||||||
| ||||||||||||||
| Posted: Thu Aug 7th, 2008 12:33 am |
|
43rd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
if the leak was in the Evap. yes, however it may not be the evap, it might be in the yoder loop which you cant see (inside the liner of the frige) or in the condensor coils.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Thu Aug 7th, 2008 03:05 am |
|
44th Post |
|
v8_ranch Senior Apprentice Appliantologist
|
Hey guys, another question... the tech that was here the other day said this thing when properly operating, should show about 5 psi on the low side. I may have missed it in the tech manual I printed off from this thread, but can someone confirm whether or not he was right? Thanks
|
|||||||||||||
| ||||||||||||||
Current time is 02:21 am
|
Page: 1 2 3 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Amana B136CAL1 Refrigerator problems | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
