|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Fisher and Paykel GWL10US |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Fisher and Paykel GWL10US | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Jan 26th, 2008 08:13 pm |
|
1st Post |
|
dadyfixitga Senior Apprentice Appliantologist
|
I have a FP GWL10US that is about 5 years old for the past 4 years it stops after a cold wash and beeps without going into the spin and rinse cycle. This has been a minor annoynce that my wife had to deal with by powering down and back on then selecting cold and starting again.Now it is not only stopping it is changing the water temp to warm or hot and chirping insted of beeping. Powering on and off will clear for about 3 minuets and it will start all over again. This continues about 3 times before it will compleat the cycle.  I put it into diagonstic mode but the instructions in the control panel do not tell how to scroll through the fault codes. When in diag. mode (spin speed slow and med.) no led's are lit in the cycle line.  Help please wife is not happy  .
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 26th, 2008 08:52 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
this may help Attachment: Pages from FP_Washer_Smart_Drive_Diagnostics.pdf (Downloaded 26 times)
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 26th, 2008 09:31 pm |
|
3rd Post |
|
dadyfixitga Senior Apprentice Appliantologist
|
did as the PDF showed and no fault code showed.[url=javascript:emoticon('', 'images/emoticons/additional/kopkrab.gif')]document.write(' [/url]'); What next?
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 26th, 2008 09:48 pm |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
try turning off the Restart Feature shown here: Attachment: Pages from FP_Washer_Smart_Drive_Diagnostics-2.pdf (Downloaded 22 times) Last edited on Sat Jan 26th, 2008 09:48 pm by RegUS_PatOff ____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 26th, 2008 10:08 pm |
|
5th Post |
|
dadyfixitga Senior Apprentice Appliantologist
|
We are trying a load now with the restart off. Thanks for all of your help. 
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Jan 28th, 2008 10:30 am |
|
6th Post |
|
dadyfixitga Senior Apprentice Appliantologist
|
Still no error codes and still stopping after wash even with autoreset turned off. What next?
|
|||||||||||||
| ||||||||||||||
Current time is 06:36 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Fisher and Paykel GWL10US | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
