setotitan
| Joined: | Fri Jun 13th, 2008 |
| Location: | |
| Posts: | 3 |
| Status: |
Offline
|
|
OK good news... I got the inverter board in and it appears to be working!! However as dumb as it sounds, the bottom panel that I took off is giving me the most problems. I line it back up to screw the three screws back in and I can't get the holes to line up. If I push up REALLY hard I can almost get them lined up but not quite. Anyone have a trick to help me out? The only thing I'm thinking may work is if I put a brick under the lip of it and use the weight of the washer to force the holes to line up. But I don't have a brick handy and I don't think it should be that hard. I'm all ears for suggestions!
|
