dunderdart
| Joined: | Thu Jun 22nd, 2006 |
| Location: | |
| Posts: | 7 |
| Status: |
Offline
|
|
I've been out of town for 2 weeks, so i'm just getting back to this. There are only 12 traces on the TP, however, on the circuit board the contacts are listed TP1 through TP15 so i'll make the assumption that the combinations you mentioned relate to those contacts. With the ribbon detached from the circuit board i tested the various combinations you gave and none of them showed continuity, even the ones that i know work. So... I started the lower oven by pressing the lower bake button and setting the temperature. I then shorted TP5 to TP14 on the connector on the circuit board and it did not cancel. I'm now confused on two points. One, why didn't any of the switches show continuity (by the way I tried all combinations for the lower bake button and none showed continuity and i do know how to use my multimeter) and Two, why doesn't shorting the two contacts on the circuit board cancel it. I'm tempted to simply buy a TP but i'd be a bit angry with myself if it didn't fix it as the TP is around $200. Any ideas??
|
