 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | Wed Aug 16th, 2006 |
| Location: | Michigan USA |
| Posts: | 1186 |
| Status: |
Offline
|
____________________
Tip Jar
| View single post by hvacdrd | |||||||||||||
| Posted: Tue Mar 11th, 2008 09:57 pm |
|
||||||||||||
hvacdrd
|
Just to clarify what and where the potential broken spider arm is...when you pull on the inner tub(the stainless steel part) there should be no movement front to back in relation to the outer tub. Try moving it more like you are pulling on the inside drum and watch the space in front. The assembly as a whole unit will move the 2" as you described. Take a close look at the space in front to see if the inner drum is centered in relation to the outer tub. Usually some signs of plastic shredding appears at the front.
____________________ Tip Jar |
||||||||||||
|
| |||||||||||||