View single post by Keinokuorma
 Posted: Tue Jan 15th, 2008 07:10 pm
Full Topic
Keinokuorma



Joined: Mon Jun 26th, 2006
Location: Finland
Posts: 1248
Status: 
Offline
The model 11505 originally discussed appears to have an FHP motor too... and the motors for your W660 and the 11505 look the same too... quite much at least.

The RCC part number for your motor is 1013788 and for the 11505, they list 1063696. Again, both are FHP, and look very similiar, although they may have different mounting to the machine.

You could call RCC and verify from them if the brush p/n 764414 fits your motor. Note that you are best off changing both even if one has plenty left.



____________________
"There is no reason anyone would want a computer in their home."
- Ken Olson, Digital Equipment Corporation (1977)