View single post by KurtiusInterupptus
 Posted: Thu Nov 15th, 2007 09:59 pm
PM Quote Reply Full Topic
KurtiusInterupptus

 

Joined: Fri Jan 12th, 2007
Location: Hickory, North Carolina USA
Posts: 459
Status: 
Offline
Alrighty then , let's get to troubleshootin'! Remove the front panel- 4 screws on the inside of the door opening and pop the front off. Feast your eyes on the heat element canister, bottom right side. remove one side of wiring to this part and test for continuity. If this is open , there's your prob. Next , test all thermostats and thermal fuses for continuity. Same as the element, remove wire from one side of each device to test. If any are open, you have found your problem. Let us know what you find and we'll go from there:)



____________________
As every cockroach knows , thriving on poisons is the secret of success.