View single post by Jedi Appliance Guy
 Posted: Sun Jun 26th, 2005 01:12 am
PM Quote Reply Full Topic
Jedi Appliance Guy



Joined: Mon Mar 21st, 2005
Location: West Palm Beach, Florida USA
Posts: 684
Status: 
Offline
     Your model number does not compute.  You'll have to use the force.  Pull the ice bin Assembly and empty the shelf below it.  Now look where the fork is. You'll see two or three screws around the outsides holding the panel in place. remove them. don't remove any of the darker colored screws toward the middle.  As you take  off the last screw grab the assembly by the fork.  Be ready.  It's kinda heavy for its size.  Set it on the shelf below.  It will still be connected to the fridge by its wiring harness.

     Let the force and your eyes be your guide on how to remove the wiring harness.  I remove the fork by sticking my 10 inch adjustable wrench in it sideways and turning it to the right.   The rest should be a piece of cake.

Last edited on Sun Jun 26th, 2005 01:13 am by Jedi Appliance Guy