View single post by blitzpb
 Posted: Wed Jun 27th, 2007 04:54 pm
PM Quote Reply Full Topic
blitzpb

 

Joined: Thu Jun 14th, 2007
Location:  
Posts: 18
Status: 
Offline
The diverter valve is under the washer.  You will have to siphon out the water left in the tube and then tip the washer forward to access the diverter valve.  As for the controller it is under the control panel.  You need to remove the 2 screws at the back of the control.  The oanel should come off and then you will have access to the motor controller.  Before removing the MC I would suggest taking a few pictures of the wire and plug layout that way you can look back at the pics while you are reassembling the unit.