View single post by hpcbmw
 Posted: Wed Jun 6th, 2007 12:00 am
PM Quote Reply Full Topic
hpcbmw

 

Joined: Thu Jan 4th, 2007
Location: Sac, California USA
Posts: 37
Status: 
Offline
Thanks to your input, i got the front panel off and took blower cover off. I see two "fuses" - on the left is a white plate with two red wires coming out (I assume this is the thermal fuse). On the right is a black plate with one red and one black wire. I jumped the two red wires on the white plate - but nothing happened. The jumpers i used are pretty thin. Should I check with a meter instead? I got a meter, but don't really know how to use it. I set it on "ohms" and touched the two red wires on the white plate and it went to about 1 1/2 ohms (pointer went almost all the way across the gauge). I touched the red and black wires on black plate and it read about 20 ohms (about 1/3 of the way across the screen).

Does the ohm meter tell you anything? Should I jump the red and black wires (i'm afraid to do that).

Thanks