View single post by tamfflcommissioner
 Posted: Fri Sep 1st, 2006 04:43 am
Full Topic


Joined: Mon Aug 21st, 2006
Posts: 7
The inner drum that you removed has that water thingy on the top. That is not your problem. Don't try to pry it off.

The outer drum is the white plastic tub thing that you lifted the inner drum out of.

Unfortuantely, you do have to remove the plastic piece with the feathered edges that shows in your photo. That is not the outer drum. It is the lint catcher or filter that Mad Mac referred to and I explained how to remove earlier.

Romove it and clean the inside of the drum with a bottle washer. I cleaned the lint filter with a plastic knife. One "feather" at a time.

Then I cleaned the whole drum inside and out with about 2 boxes of Mr. Clean Magic Erasers. Then I attacked the white plastic outer drum with more erasers. Make sure you scrape down the shaft. I am sure it is gooooooey. It is supposed to be shiny metal...:)

Good Job!