View single post by Samurai Appliance Repair Man
 Posted: Fri Apr 8th, 2005 10:24 am
PM Quote Reply Full Topic
Samurai Appliance Repair Man



Joined: Mon Mar 21st, 2005
Location: Otterville, New Hampshire USA
Posts: 16083
Status: 
Offline
So you're saying the dryer motor will continue running even with the timer in the off position?  If yes, then check for timer's #1 contact set fused together:  with timer set to the off position (dryer unplugged!) check for continuity from the gray-wire terminal to the yellow-wire terminal.  Remove one of those wires before measuring so that you don't read back through the circuit.  If you read continuity, the timer #1 contact set is welded shut and you need a new timer.




____________________
To ask a question, use our new forums==> http://appliantology.org

365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed!