View single post by AccApp
 Posted: Mon Jul 3rd, 2006 05:15 pm
PM Quote Reply Full Topic

Joined: Sat Jun 3rd, 2006
Location: Eatontown, New Jersey USA
Posts: 1788
May as well replace both ref thermistors while you are in there. To find them, remove all shelving above the crisper bin shelf (the door shelves can stay in). Remove the light diffuser by dropping down the clips which hold it in place (can be in front or in back, installs both ways) and sliding the light diffuser back and down. There will be three stainless phillips head screws, remove them and pull the top of the big white panel forward then pull it up and out. You will see the two thermistors, be sure and read the directions in the kit.

While you're there, have a look at the frost pattern on the evaporator.

"When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth." Sir Arthur Conan Doyle.