 |
Full Topic |  |
| Joined: | Sun Jan 29th, 2006 |
| Location: | |
| Posts: | 7 |
| Status: |
Offline
|
Good luck,
| View single post by gak | ||||||||||
| Posted: Sun Jun 18th, 2006 12:22 pm |
|
|||||||||
gak
|
Hi, I faced the same problem and ordered the rear assembly with the new bearings. only to find out after taking it apart that one of the supports that hold the drum to the spindle was cracked and broken and had to replaced. So I had to replace the drum anyway. In my case replacing the whole assemble would have saved me time and money. The lesson learned would be to not order the rear assemble until you take it apart to examine the drum spiders, or order the complete assemble and be safe. Good luck,
|
|||||||||
|
| ||||||||||