View single post by evofxdwg
 Posted: Thu Jun 15th, 2006 02:35 am
PM Quote Reply Full Topic
evofxdwg

 

Joined: Sat May 13th, 2006
Location:  
Posts: 10
Status: 
Offline
Page 3 of instructions.


I also found the mounting alignment pins for the ice lever microswitch were broken. This is another crappy plastic part. I didnt want to spend more $ on this 10+ yr old refrigerator so i used Plumbers Goop to glue the alignment pins and spacer back. Of course when it dried it was misaligned but i found a wire tie around the ice lever pin gave it just enough extra thickness to engage the microswitch. Works fine lasts a long time!

Attachment: 820175pg3of3.jpg (Downloaded 21 times)