View single post by The Seven
 Posted: Thu Apr 7th, 2005 03:14 am
PM Quote Reply Full Topic
The Seven

 

Joined: Tue Mar 29th, 2005
Location: Canada
Posts: 181
Status: 
Offline
 steve wrote:
The Seven wrote:
During the spin cycle, the finger should engage securely to the square (should be rectangular) holes on the clutch side. Due to the wear of the tip, the finger fails to engage securely and bangs onto the end part of the spring on the clutch side.

Are those the slots in the base of the clutch plate?

Replacing the cam looks like I just have to remove the retaining c-clip and pull it out. I hope that's all that's wrong.

Thanks,

Steve

Yes, you get it at last (hopefully).



____________________
The Seven