View single post by steve
 Posted: Thu Apr 7th, 2005 02:11 am
PM Quote Reply Full Topic
steve

 

Joined: Wed Apr 6th, 2005
Location: St. Charles, Illinois USA
Posts: 25
Status: 
Offline
The Seven wrote:
During the spin cycle, the finger should engage securely to the square (should be rectangular) holes on the clutch side. Due to the wear of the tip, the finger fails to engage securely and bangs onto the end part of the spring on the clutch side.

Are those the slots in the base of the clutch plate?

Replacing the cam looks like I just have to remove the retaining c-clip and pull it out. I hope that's all that's wrong.

Thanks,

Steve