View single post by The Seven
 Posted: Thu Apr 7th, 2005 12:59 am
PM Quote Reply Full Topic
The Seven

 

Joined: Tue Mar 29th, 2005
Location: Canada
Posts: 181
Status: 
Offline
Your upper photo shows the square finger tip of the plastic cam is worn out.
During the spin cycle, the finger should engage securely to the square (should be rectangular) holes on the clutch side.
Due to the wear of the tip, the finger fails to engage securely and bangs onto the end part of the spring on the clutch side.

You need a new cam!



____________________
The Seven