View single post by txtax1122
 Posted: Mon May 8th, 2006 04:43 am
Full Topic
txtax1122

 

Joined: Sun May 7th, 2006
Location:  
Posts: 8
Status: 
Offline
Dear scuba415,

1. This is an excellent post which I have taken the liberty of copying for future reference.

2. I have been reading your prior post regarding your noisy Asko T700 Dryer with bad rollers and have a question for you.

a. By "bad rollers" do you mean the wheel bearing with round black rubber covering that is on the right side of the dryer if you are looking at it from the front.

b. If this is what you were refering to, could you please post how you fixed your problem. (On your post you said the bad roller was on the left side of your dryer. I did not see a roller on the left side, just the right side.)

c. I removed the front panel of my ASKO T700 Dryer to see what was making the dryer squek so much and found the black rubber part of my roller had fallen of its bearing and was cracked in several places. It was laying on the bottom of dryer right underneath the bearing.

d. Was replacement simply a matter of getting a new rubber part and putting it back on the bearing or is a new bearing with new rubber needed.

e. How many roller bearings is on/in the ASKO T700? If there are more than one, I would like to replace them all at one time.

I thank you in advance for your reply. If what I am describing does not match your problems please tell me so that I can place a HELP message in the regular forum.

Thanks again.