 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | Wed Apr 6th, 2005 |
| Location: | St. Charles, Illinois USA |
| Posts: | 25 |
| Status: |
Offline
|
Can you locate the source area of where the noise is coming from?
From your picture it looks like spin basket is ok, maybe the plastic filter thingy on the bottom of the spin basket as came loose. Is the balance ring at the top of the spin basket attached good and tight?
Leave the agitator off and put machine into a spin cycle and see if noise is still there. This will eliminate the possiblity of the agitator top section being loose and banging.
Both the balance ring and lint filter are on solid.
The banging comes from below the spin basket in the center.
It still does it with the agitator off as soon as I activate the timer in rinse or spin.
The banging is quite loud. Is it common for something in the trans to let go and flop around but still agitate and spin.
It's almost like the wig wam is bashing around while the basket is being spun up
I'll try changing setting for agitation and see if the duration between thumps changes.
Thank you all,
Steve
Last edited on Wed Apr 6th, 2005 04:35 pm by steve