View single post by Budget Appliance Repair
 Posted: Wed Apr 6th, 2005 11:34 am
PM Quote Reply Full Topic
Budget Appliance Repair


Joined: Sat Apr 2nd, 2005
Location: Eureka, California USA
Posts: 2870
NO, your not missing anything, the drive block is OK......

Can you locate the source area of where the noise is coming from?

From your picture it looks like spin basket is ok, maybe the plastic filter thingy on the bottom of the spin basket as came loose. Is the balance ring at the top of the spin basket attached good and tight?

Here's a link to a picture of the spin basket and outer tub, ref#12 is the lint filter.

Leave the agitator off and put machine into a spin cycle and see if noise is still there. This will eliminate the possiblity of the agitator top section being loose and banging.

William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501

P.S. -- Samurai, do you know if this board recognizes html code, and if so how to make it do so. I really hate those long links that screw up the formating of the board

Here's what I tried for but couldn't get it to work

<a href="">CLICK HERE</a>

so the words "CLICK HERE" only show instead of the long url

Last edited on Wed Apr 6th, 2005 12:18 pm by

William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501