View single post by Trying to help
 Posted: Thu Apr 13th, 2006 02:27 pm
PM Quote Reply Full Topic
Trying to help

Joined: Fri Oct 21st, 2005
Location: Georgia USA
Posts: 2390
The valve is going to toggle back and forth trying to get to 70 degree cold water, and 105 degree warm water both + or - 10 degrees. As long as you have a water source to both coils it will fill OK. It will just start on the cold solenoid then switch to the hot for the rest of the cycle. If all you have is cold water, use powder and try to run a load with bleach every now and then. Cold water, liquid detergent and washers (especially front loaders) do not get along well.