View single post by Trying to help
 Posted: Sun Mar 19th, 2006 01:53 pm
PM Quote Reply Full Topic
Trying to help



Joined: Fri Oct 21st, 2005
Location: Georgia USA
Posts: 2390
Status: 
Offline
That means the DW is on that GFI circuit. Though not "plugged" in to it, it is wired into that circuit. One thing you can try is to kill power to the unit and use a test cord to run the unit on a non GFI outlet. If it works, then the problem is more then likely in your GFI circuit. If it does not, then we will want to start making some cks to the unit to see if we have a s shorted or grounded component. Since your model starts each cycle with a drain purge, I would start by ohming out your motor and making sure your connections are good and tight at your wire nuts in your DW conduit box behind the kick plate.      



____________________
If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm