View single post by Budget Appliance Repair
 Posted: Sat Mar 18th, 2006 10:22 am
PM Quote Reply Full Topic
Budget Appliance Repair

 

Joined: Sat Apr 2nd, 2005
Location: Eureka, California USA
Posts: 2364
Status: 
Offline
 Yes, that is the one he means. There are three real comman problem areas with these machines.

1) The main tub seal going out and take the bearing out.
2) The lower one-way clutch/bearing that lets the transmission only turn in one direction going out letting transmission turn freely in both directions, (complete transmission has to be replace or completely strip transmission down to replace lower transmission case).
3) The transmission itself locking up internally during agitate, (again, meaning replacing the transmission).

These machines, as far as I'm concerned are basic JUNK!!!!!



____________________
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501