| View single post by Trying to help | ||||||||||
| Posted: Sun Mar 12th, 2006 05:16 pm |
|
|||||||||
Trying to help
|
Your clock is bad. The board transformer supplies voltage to the clock for display and the entering of oven commands. The fact that you can program indicates the voltage is still present (I've never had one input fail at a time). If you have a meter and want to be sure (and impress the neighbors and the little lady), do a voltage check on the clock. Find the J1 harness and do a DC voltage check from pin 1 to pin 2 on the supply harness. This is your clock supply voltage. You should have 9-12 VDC.
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
|||||||||
|
| ||||||||||
