View single post by Trying to help
 Posted: Fri Mar 10th, 2006 12:27 am
Full Topic
Trying to help



Joined: Fri Oct 21st, 2005
Location: Georgia USA
Posts: 2390
Status: 
Offline
Suspect open timer cam 6. Put your timer in spin, pull it out like you want it to run, set your meter on 120VAC scale and do a voltage check from Black 32 on your timer to the white wire on the pressure switch. IF you read 120VAC, then you have an open timer cam. Replace timer and should be good to go. 



____________________
If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm