|View single post by jm56|
|Posted: Tue Apr 5th, 2005 01:33 pm||
|Thank you for your response.
Per a suggestion:
I removed the belt, pushed the button, and the motor turned freely. I opened/closed the door. And pushed the button again; just fine. Ran for about 5 minutes.
I tested the movement of the barrel by hand: turns nice.
I replaced the belt, pressed the button. Fine.
I opened/closed the door. And pushed the button again; just fine.
Ran for 10 minutes, air fluff.
Started it again. OK.
Put in some jeans, 1st click on perm press, ran for 20 minutes. All dry.
I had an intermittantly working set of gas solonoids last year. Took 6 months for them to completely quit. This could be another such gremlin.