View single post by Pegi
 Posted: Wed May 11th, 2005 04:11 am
PM Quote Reply Full Topic
Pegi



Joined: Tue May 3rd, 2005
Location: Wichita Falls, Texas USA
Posts: 13120
Status: 
Offline



THIS SERVICE POINTER APPLIES TO THE FOLLOWING BRANDS: Whirlpool and KitchenAid:




 




4322495




December, 1998




ALL WHIRLPOOL FREESTANDING




ELECTRIC AND GAS RANGES




with Motorized Self-Clean Door




Latch Mechanism




(STARTING WITH CODE DATE RH20)




CAUSE:




COMPLAINT:




Cannot close the oven door completely because the selfclean




latch mechanism interferes with it.




When the self-clean cycle is selected, the motor will take




about 6 seconds to completely lock the door. If a customer




pulls the door open before the latch arm can lock




it, the latch mechanism will be extended and interfere




with closing the door. After 60 seconds the self-clean cycle




will terminate and an error code (E0 F5) will appear.




CORRECTION:




Follow the instructions to unlock the latch and properly




close the door:




l Press CANCEL to erase the error code.




l Depress and hold down the DOOR LIGHT SWITCH




plunger (located on the front frame of the oven).




l Press CLEAN (not START). Latch will unlock in about




6 seconds




The service pointer from Whirlpool... :)   Pegi



____________________
To ask a question, use our new forums==> http://appliantology.org

365-Day No-Hassle Return Policy at RepairClinic!