View single post by mongo
 Posted: Tue Feb 21st, 2006 05:58 pm
Full Topic
mongo

 

Joined: Sun Feb 19th, 2006
Location:  
Posts: 2
Status: 
Offline
Reason I was checking for DC was to see if current was being applied to the fill valve - really trying to see if maybe the fill valve itself was faulty.  From what I measured, it had a current on the first fill but not on the subsequent fill.  However, measurement may not be entirely accurate as I did have some trouble getting the tester leads on the fill valve - kind of paranoid about reaching into a live dishwasher...