View single post by Budget Appliance Repair
 Posted: Thu Jan 12th, 2006 12:11 pm
Full Topic
Budget Appliance Repair

 

Joined: Sat Apr 2nd, 2005
Location: Eureka, California USA
Posts: 2870
Status: 
Offline
Do you see any obvious signs of oil dripping from transmission or any oil on the inside of the cabinet?

If not then to check and/or also shim the clutch to tighten it you whould have to remove the agitator which will allow you to remove the transmission.

Check for a stripped out drive block first, by removing the agitator you will be able to see if the drive block is bad or not.

One other possible problem that I forgot to include is a broken brake cam release lever which would also require the transmission removal to check.



____________________
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501