goofieshot
| Joined: | Tue Dec 6th, 2005 |
| Location: | |
| Posts: | 12 |
| Status: |
Offline
|
|
H/F code - i have now installed a hose that loops to the bottom of the machine and travels up approx. 6 inches above the machine before going down to the drain to compensate for the siphon effect, but it seems that i was not successful in correcting the h/f problem because the dreaded H/F code popped up again and i heard water running into the drain.  Seems to happen most often on the prewash cycle. When machine is restarted in wash - it completes the cycle without a problem. Hoping for any other suggestions. Thanx lots - Andre.
|
