View single post by hrdryder
 Posted: Sat Dec 10th, 2005 09:52 pm
Full Topic


Joined: Sat Dec 10th, 2005
Posts: 2
Slightly new, related topic:

Our machine (22722100) has developed a tick during the agitate cycle.  I've taken the cabinet open, and the sound is coming from the motor itself.  There is a centrifigal switch assembly inside the motor that appears to rotate 20-30 degrees on the motor shaft and seems to be the source of the noise.  With the motor removed and running on the ground (no load), the motor runs very briefly, every few seconds.

Is it normal for this switch to rotate like this?